- 9 -
EN
4. IMPORTANT
Extreme care must be taken when operating the device, because touching hot surfaces can cause burns. can lead.
Check that the power supply cable does not touch the hot surfaces of the device.
It is forbidden to leave the switched-on grill plate without supervision. Disconnect the device from the power supply source if it
is not used.
5. OPERATION
The thermostat handle allows you to set an operating temperature in the range between 50⁰C and 300⁰C.
Before using the appliance for the first time, clean it carefully to remove all substances that have accumulated on the grill plate
during the manufacturing process. Use a soft cloth with a non-corrosive detergent. Then you should set a temperature value of
300⁰C and let the device work for one hour. During this time, smoke may appear - this occurs when the safety layer is burned out
- this is a normal process.
After 30 minutes, set the appropriate temperature value (using the thermostat handle) and liberally smear the plate with butter
or oil. It is not recommended that excessive amounts of grease or other residues collect on the plate, as this may lead to the for-
mation of deposits. Charcoal deposits should be removed immediately with the help of a scraper.
The device has been equipped with a collection tray for grease, into which other scraped remains.
The device must be warmed up before daily use. It is necessary to heat the grill plate for 15 minutes before grilling. This process
ensures even heat distribution.
To turn off the griddle, turn the thermostat handle maximally to the left, to the end of the scale.
6. CLEANING AND MAINTENANCE
Before any cleaning or maintenance work is carried out on the unit, it should be disconnected from the mains supply.
The appliance should be inspected annually to avoid accidents.
Scrape off as much grease and food residues as possible from the grill surface using only a damp cloth.
Once the appliance has cooled down, clean the grill surfaces and housing with a damp cloth.
Clean the grease drawer and put it back in place.
Never immerse the appliance in water or use a water jet to clean it.
Wipe the appliance with a dry cloth and wait at least 30 minutes before next use.
7. TROUBLESHOOTING
The device is connected but the heaters do not heat:
•
Make sure the unit is powered.
•
If the unit is not working, contact service.
The unit has blown fuses:
•
An appliance of this wattage should be installed on separate circuits. Consult a qualified electrician to ensure proper installa-
tion.
•
If this does not correct the problem, contact Service.
8. SCHEDULE
Summary of Contents for 745120
Page 11: ......
