Stalgast 430400, Instruction Manual, Page: 9 / 12

- 9 -
EN
1
2
1
2
3
TYP: 1
TYP: 2
5. OPERATING THE HEATER
1.
Fill the container with hot water (50 to 60 C). Remember that the heating module cannot be immersed in water! Check the
level of water. The heater cannot be used without water!
2.
Install the cover
3. Connect the heating module to a source of electricity and wait 30 to 40 minutes for the heater to reach proper temperature.
Attention! Never use a heating module without a heater.
6. CLEANING
1.
Disconnect the power cord from the source of electricity
2.
Wait for the heating module to cool down
3. Remove the heating module from the heater
4. Clean with a damp cloth
Attention! Do not submerge the heater under water or clean it under running water.
7. TROUBLESHOOTING
MALFUNCTIONS CAUSES SOLUTIONS
Food items are cooling down and the
food is not heated
Water container was filled with cold
water
Fill the container with hot water
The heater was not warmed up before
food was placed in the container
Warm-up the device for 30-40 minutes
before use
The heater was not installed properly
Check if the heater was installed
properlyi
Significant loss of heat The lid is open Check and close the lid if necessary