- 4 -
4. Operation
Plug the power cord into a properly wired and grounded electrical outlet.
•
Turn the power switch on rear of unit to position “ON”.
Once the red light comes on the machine must warm-up .This period
•
varies depending on conditions but should not take more than 10
minutes under any circumstances.
The green light on the remote control will turn on once the machine is
•
ready to produce haze. When the green light turns on, the machine may
be operated using the remote control. Prior to the green light turning on
the machine will not haze and the functions will not respond.
The fog machine is controlled via the remote control. Please refer to the
•
section titled Remote Control Operation for detailed instruction on the
various functions available.
The remote unit’s lamp will cycle on and off as the machine re-heats to
•
the proper operating temperature.
As your model includes a mounting bracket designed for overhead
•
installation, it may be installed at floor level or suspended overhead. If
the unit is to be mounted using the bracket, it is important that the fog
does not shoot directly at any one’s face. Whatever installation method
you choose, do not allow the unit to have more than a 15 degree angle
of inclination.
Important:
Always monitor tank fluid level during operation. The fog machine can
suffer damage when run without fluid. If the machine does not function after
having been run without fluid, please contact your Fogger dealer for service.
Remote Control Operation
The INTERVAL knob adjusts the time between discharges when the
•
timer function is engaged. The range is from 10 ~ 180 seconds.
The second knob labelled “DURATION” controls the duration of the
•
haze blast produced. The range is from 1 ~ 10 seconds.
The yellow TIMER button controls the timer function. Depress the
•
button to activate it. When activated the yellow light will turn on.
Adjusting the interval knob will determine the time between haze output
(10 ~ 180 seconds).
The green MANUAL button will produce a continuous blast at maximum
•
volume while the button is held down. When released, the manual
function stops and the machine will return to the previous setting.
