Stairville MH-x200 Pro Spot, User Manual

Page: 35 / 72

Press [MODE/ESC] repeatedly until the display shows ‘Tilt Angle’ . Press [ENTER] to open this
menu item. Now use [UP] and [DOWN] to determine the Tilt range. Choose between ‘270’ (Tilt
range = 270°), ‘180’ (Tilt range = 180°) and ‘90’ (Tilt range = 90°).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] .
Press [MODE/ESC] repeatedly until the display shows ‘Channel’ . Press [ENTER] to open this
menu item. Now use [UP] and [DOWN] to select one of the following DMX operating modes: 11
channel (display shows ‘Basic)’ or 16 channel (display shows ‘Advanced’ . This setting is only
relevant if the device is controlled via DMX.
When the display shows the desired value, press
[ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] .
Press [MODE/ESC] repeatedly until the display shows ‘Temp. Display’ . Press [ENTER] to let the
display show the current LED temperature.
Press
[MODE/ESC] to quit the menu.
Tilt range
Operating mode ‘DMX’
Temperature display
Operation
MH-x200 Pro Spot
35