Stairville MH-x200 Pro Spot, User Manual

Page: 34 / 72

Press [MODE/ESC] repeatedly until the display shows ‘Tilt’ . Press [ENTER] to open this menu
item. Now use [UP] and [DOWN] to toggle between ‘Reverse’ (inverse direction of inclination)
and ‘Normal’ (normal direction of inclination).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] .
Press [MODE/ESC] repeatedly until the display shows ‘Display’ . Press [ENTER] to open this menu
item. Now use [UP] and [DOWN] to toggle between ‘Bright’ (display permanently on) and ‘30
Close’ (display shuts off when no button is pressed for 30 seconds).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] .
Press [MODE/ESC] repeatedly until the display shows ‘Pan Angle’ . Press [ENTER] to open this
menu item. Now use [UP] and [DOWN] to determine the Pan range. Choose between ‘540’ (Pan
range = 540°), ‘360’ (Pan range = 360°) and ‘180’ (Pan range = 180°).
When the display shows the desired value, press [ENTER] to confirm the setting and then
[MODE/ESC] to proceed to the next menu item. To switch the menu item without changes,
press [MODE/ESC] .
Tilt inversion
Display duty cycle
Pan range
Operation
moving head
34