Stairville MaTrixx TLB-20 MK-II RGBW, User Manual

Page: 26 / 44

Automatic operation can only be activated if the unit is working in standalone mode or as
master device in a master / slave combination. This setting is only relevant if the unit is not
controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Auto’ . Press [Setup] . Now you can select one
of the automatic options. Use [UP] and [Down] to select a value between ‘n.001’ and ‘n.100’ .
To adjust the speed of the selected automatic option, press [Setup] . Now press [UP] and [Down]
to choose a value between ‘SP01’ (slow) and ‘SP99’ (fast) or ‘SPFL’ (flash effect).
To adjust the flash frequency, press [Setup] . Now press [UP] and [Down] to choose a value
between ‘FS00’ (slow) and ‘FS99’ (fast).
Wait about 30 seconds until the display turns off. Then the settings have been applied. To
return to the higher menu level without changes, press [Mode] .
Operating mode ‘Automatic’
Operation
LED flower effect
26