5
There are different patterns available, e.g. all connected LED PARs do
the same, each shows different patterns, chaser programs, fade in – fade
out patterns and fade over patterns. The steps of the patterns can be
controlled by music beat or by a potentiometer. The music sensitivity is
controllable. The colour patterns offers a 100% colour mode, a 100%
/ 50% colour mode, and a 100% / 75% / 50% /25% colour mode. The
colours are shown randomly.
2.1.1.3 5-channel slave mode
In this mode the LED PAR is used as a DMX slave.
The 5-channel slave mode uses build in functions, which will be controlled
by the DMX signal. An external DMX controller controls the Led PAR.
2.1.1.4 3-channel slave mode
The 3-channel slave mode is for use with a standard DMX controller.
The LED PAR can be controlled with all 512 channels. Each colour is
controlled by one DMX channel. All 512 DMX channels can be used.
2.1.2 Stand alone modes
2.1.2.1 Auto fade mode
There is an auto fade mode available with different fade in/fade out
patterns and fade over patterns. The fade in/fade out and fade over time
can be set accurate by 9 time settings.
The auto fade mode supports different colour change patterns:
The colour patterns offer a 100% colour mode, a 100% / 50% colour
mode, and a 100% / 75% / 50% /25% colour mode. The colours are
shown randomly.
2.1.2.2 Auto change mode
The auto change mode supports different colour change patterns.
The colour patterns offers a 100% colour mode, a 100% / 50% colour
mode, and a 100% / 75% / 50% /25% colour mode. The colours are
shown randomly.
The change speed can be controlled by music or potentiometer.
2.1.2.3 Manual mode
In the manual mode each colour can be set to on in steps of ~14%.
