Stairville DCL Flat Par 5x4W CW/WW, User Manual

Page: 32 / 48

This setting is only relevant when the device is controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘d.xxx’ and confirm with [Setup] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (display shows ‘d.001’ … ‘d.512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
2-channel 511
6-channel 507
Press [Setup] . Now use [Up] and [Down] to select one of the following DMX operating modes:
n ‘2-ch’ (four channels)
n
‘6-ch’ (six channels)
DMX mode
Operating
32
DCL Flat Par 5x4W CW/WW
LED PAR