manualshive.com logo in svg

Stairville DCL Flat Par 5x4W CW/WW, User Manual

Share
Download
Stairville DCL Flat Par 5x4W CW/WW User Manual Download Page 11

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts

inside. Do not use the device if covers, protectors or optical components are missing or damaged.

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable

or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.

WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.

Safety instructions

 

DCL Flat Par 5x4W CW/WW

11

LED PAR

Summary of Contents for DCL Flat Par 5x4W CW/WW

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands