© 2011 • Musikhaus Thomann e. K. • Treppendorf 30 • 96138 Burgebrach • Germany • www.thomann.de
AP mode
Program is executed automatically and the
display shows the steps. You can adjust the
chasing speed using TAP SYNC or SPEED
CONTROL.
3. Full on and flash
Press FULL ON button to activate the “full
on” function of all outputs. Press a flash
button to activate the “full on” function of one
channel. These two functions are effective in
any mode.
4. Stand by
Press this button once to turn off all outputs.
Press it once more to exit stand by mode.
5. Audio input select
You can select audio signal from mic or
audio line input. Press the PROG SELECT
button and turn off the power. Wait some
seconds, then turn the power on again. Now
the display shows “I” or “E” (“I” = internal
mic, “E” = external audio input). Press
MODE SELECT once, then the audio signal
will be changed and the LED display will
change accordingly. Press the button again,
and the audio signal will be changed again.
Disposal
Do not dispose of the device at the end of his operating life in your
normal domestic waste. This device is subject to the European
Guidelines 2002/96/EC.
X
Have the product disposed of by a professional disposal company of by
your communal disposal facility.
X
Observe the currently applicable regulations. In case of doubt contact
your disposal facility.
X
Dispose of packaging materials in an environmentally responsible
manner.
