STAIRVILLE • DIMMER DC-405S
www.thomann.de
7
be increased by 10 steps per second. Press
PROG MODE SELECT, then
program will be decreased. Corresponding
indicator is lighting. Chasing speed is
controlled by audio signal.
PROG SPEED
Corresponding indicator is lighting.
Operating is same as PROG SOUND but
the chasing speed is controlled by SPEED
control or TAP SYNC.
AUTO SPEED
Operation according to PROG SPEED. In
this mode each program will be executed
four times. Then next program will be
activated. The corresponding indicator is
lighting.
AUTO SOUND
Operation is same as AUTO SPEED. Each
program will be executed four times.
MEMORY
In this mode, you can select the desired
operating mode from Program/Manual/Auto
sound/Auto speed. The LED indicates “PR,
ST, AS, AP” accordingly. Press and hold
PROG SELECT, then press STAND BY
once. PROG DISPLAY will show the current
operating mode. Press STAND BY again
to select the next mode. Release PROG
SELECT, then the selected mode will be
executed.
PR mode
Press PROG SELECT, until “0 1”appears
in the display. Adjust master dimmer
control or channel dimmer control to meet
user’s requirement. Press PROG SELECT
button, then the display will flash 4 times
continuously, which means it is memorized
and the display will show “02”. You can store
programs in this way until “32” appears. Now
exit from “PR” mode and engage any other
mode. If you fail in a certain step, you should
restart programming, otherwise the previous
operation was not successful.
ST mode
In this mode, press PROG SELECT once.
Then the program will execute the next step.
The display will show the information.
AS mode
The program is executed according to the
music rhythms. The display shows the steps.
