background image

Notes on safety

For your own safety you must read through this chapter 

at first completely

!

   Risk of electrical shocks!

Only connect the device to a mains power supply, that complies to the technical specifications 

• 

given in this manual.
Do not operate the device if the power cord or the mains plug are damaged.

• 

Never submerse the device in water. Wipe it with a slightly moistened cloth only.

• 

Do not expose the device to rain and never use it in a damp or wet environment. Indoor use 

• 

only! Make sure that the power cord never becomes wet or moist during use.
Under no circumstances may you open the device housing. Should you do so your safety would 

• 

not be assured and the warranty will become void. There are no operational components what-

soever inside, only really high voltage that can give you a deadly shock!

Do not place objects containing fluids, e.g. flower vases or beer bottles, on or near the device.

• 

Notice regarding disconnection from mains-power: 

• 

To completely disconnect the device from mains power, you must pull the plug from the power 

socket. For this reason the device should be placed in a position where unobstructed access to 

the power socket is assured at all times, so that in an emergency you will be able to immediately 

pull out the plug. To eliminate the risk of fire you have to completely disconnect the power plug 

from the power socket when the device is not going to be used.
Always grasp the power cord by the plug. Do not pull on the cord itself and never touch the pow-

• 

er cord with wet hands as this could result in a short circuit or an electrical shock. Do not place 

the device, speakers or anything else on the power cord and make sure that it does not become 

clamped. Never tie knots in the power cord and do not bind it together with other cables. Lay the 

power cord so that no one can step on or stumble over it. A damaged power cord can cause a 

fire or an electrical shock. Check the power cord from time to time. Should it become damaged 

contact our customer service department to have it replaced.

Always operate the device only on a properly wired and correctly earthed socket (see specifica

-

• 

tions), never sever the power cord’s earth wire. Otherwise a 

LIFE THREATENING 

situation ex-

ists!
Never use this device in places, where it is subject to 

• 

> excessive vibrations and/or impacts, 

> temperatures above 30°C / 100°F or below 5°C / 40°F,

 

> extreme low or high humidity (ideal humidity is between 35% and 80%).

   Risk of fire!

Never leave the device unattended during operation.

• 

Never cover the ventilation slots of the device while it is on. Do not place the device in locations 

• 

that are subject to direct sunlight. If you do, it may overheat and become irreparably damaged.
Never operate the dimmer pack in the vicinity of heat sources such as cookers, heating ele-

• 

ments or other heat producing installations.

Do not place open fire sources, such as candles, on the device.

• 

Before a storm and/or a thunderstorm with a risk of lightning, disconnect the device from the 

• 

electrical power source.

  Risk of personal injury!

Keep children away from the power cord and the device. Children frequently underestimate the 

• 

dangers of electrical devices.
Provide a stable location for the device.

• 

Do not operate the device if it has sustained a fall or is damaged. Have the device checked or,  

• 

if necessary, repaired by qualified technicians.

Summary of Contents for D1210









Reviews: