Stairville BSW-100 LED BeamSpotWash, User Manual, Page: 17 / 44

1.
To enter the main menu, press [MENU] .
2.
Use [UP] and [DOWN] to navigate to menu item ‘Fixture Setting’ .
3.
To open the ‘Fixture Setting’ menu, press [ENTER] .
4.
Use [UP] and [DOWN] to select the submenu ‘Pan Inverse’ .
5.
Confirm your selection with [ENTER] .
6.
Use [UP] and [DOWN] to choose between ‘No’ or ‘Yes’ .
7.
Confirm your selection with [ENTER] .
ð
Pan inversion is activated or deactivated.
8.
To leave the menu, press [MENU] or wait for 30 seconds.
1. To enter the main menu, press [MENU] .
2. Use [UP] and [DOWN] to navigate to menu item ‘Fixture Setting’ .
3. To open the ‘Fixture Setting’ menu, press [ENTER] .
4. Use [UP] and [DOWN] to select the submenu ‘Tilt Inverse’ .
5. Confirm your selection with [ENTER] .
6. Use [UP] and [DOWN] to choose between ‘No’ or ‘Yes’ .
7. Confirm your selection with [ENTER] .
ð
Tilt inversion is activated or deactivated.
8. To leave the menu, press [MENU] or wait for 30 seconds.
This function causes the pan or tilt positions to be automatically adjusted to the cor-
rect position when they are twisted. To enable or disable this function, proceed as
follows:
1.
To enter the main menu, press [MENU] .
2.
Use [UP] and [DOWN] to navigate to menu item ‘Fixture Setting’ .
3.
To open the ‘Fixture Setting’ menu, press [ENTER] .
4.
Use [UP] and [DOWN] to select the sub menu ‘P/T Feedback’ .
5.
Confirm your selection with [ENTER] .
6.
Use [UP] and [DOWN] to choose between ‘No’ or ‘Yes’ .
7.
Confirm your selection with [ENTER] .
ð
The Tilt / Pan Feedback function is activated or deactivated.
8.
To leave the menu, press [MENU] or wait for 30 seconds.
Activate or deactivate pan inversion
Activate or deactivate tilt inversion
Activate or deactivate Tilt / Pan Feed-
back
Operating
BSW-100 LED BeamSpotWash
17