CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright
light. This is also valid immediately after you turn on the device, when the device
operates in automatic mode or under remote control and when you turn off a
DMX controller that is connected to the device. Persons staying near the device
could be injured or frightened.
Before you turn on the device and during the operation, always ensure that
nobody stays close to the device. If work has to be performed in the area of move‐
ment or in the near vicinity of the device, it must remain turned off.
NOTICE!
Fire and overheating hazard
The distance between the light source and flammable materials must be greater
than 12 m. The distance to non-inflammable materials must be greater than 2 m.
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
moving head
22
Summary of Contents for B5R
