- 23 -
4100PT Console layout
Programs: LED’s will light up next to the program selected.
W0rk-Out Statistics: LED’s will light up above the workout statistic being
displayed.
Select Function: During normal operation, the programs will display
workout stats in the lower text window, cycling through Time, interval time,
steps/min, Calories burned, floors climbed and average heart rate. If you
would like to display a single workout statistic, press the select bottom
until the LED toggles to the appropriate statistic.
Quick Start: Selecting the
<quick start> button as a program choice will
start the stepper in manual mode at an intensity level of 4. The display will
then prompt the user to enter their weight. On this home stepper, the
resistance generated is dependent on use weight and therefore must be
entered by each user. Selecting the
<quick start> button after program
selection but before data entry, will enter all the default data entry
settings. Again, the user’s weight must be entered, even with the quick start
selection.
