8
HOTRONIX
®
MAXX
®
CAP
Adjusting Pressure
Pressure
Adjustment Knob
The Pressure Adjustment Knob is located directly under the
lower platen.
Turn the knob clockwise to increase pressure and
counterclockwise to decrease pressure.
Remember
to allow for the thickness of your cap when
adjusting the pressure.
WARNING:
Structural damage caused by excessive
pressure is not covered under the limited warranty!
Operating Instructions
Printing/Pressing
Once your equipment has reached the designated
temperature:
•
Pull the Cap Hold Down Lever up and towards the
operator and load the cap onto the lower platen.
•
Pull out the sweatband and position the cap so it clears
the upper platen when the machine is closed.
•
Push the Cap Hold Down Lever down and away from the
operator to stretch the cap and keep it from shifting.
•
Position your design and lower and lock the heat platen
into the PRESS position to begin the automatic timing
process.
•
The timer will automatically count down and audibly
signal you to lift the heat platen into the UP position
when the print cycle is complete.
Pressure
Adjustment Knob
