Stahl ConSig 7040 Series, Operating Instructions Manual

Page: 34 / 40

Mounting and Installation
14
125711 / 704060300010
2019-02-19·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Control Unit System
Series ConSig 7040
7.2 Mounting / Dismounting, Operating Position
This device is suitable for outdoor and indoor use.
• If the exclosure and explosion-protected electric equipment are used outside,
it is advisable to provide a protective roof or wall.
7.3 Installation
7.3.1 Mount Cable Entries
The following cable entries can be used to insert cables and conductors:
• Plastic or metal cable entries for permanently installed electric lines or
• Plastic or metal cable entries with strain relief for electric lines, which are not
permanently installed.
Options for sealing unused entry holes:
• use plastic or metal stopping plugs with a corresponding certificate.
04584E00
Additional dimensions for 8161 cable glands
04585E00
Additional dimension for flanges
Operation under difficult conditions, such as, in particular, on ships,
requires additional measures to be taken for correct installation,
depending on the place of use. Further information and instructions
on this can be obtained from your regional sales contact on request.
Dimensional drawings (all dimensions in mm [inches]) – Subject to modifications
a
Dimension a
min.
max.
M20 25
[0.98]
31
[1.22]
M25 27
[1.06]
33
[1.30]
b
Flanges Dimension b
brass 16 [0.63]
moulded
material
16 [0.63]