Stahl 8624-1, Operating Instructions Manual

Page: 49 / 60

167921 / 862460300010
S-BA-8624/1-01-en-30/07/2008
Setting parameters for the control unit
19
Control unit Ex p
8624/1
9.3 Resetting the factory settings
X Switch off the power supply of the control unit.
X Set the selector switch to the 1 o'clock position (arrow pointing upwards, then one step
in clockwise direction).
X Switch on the power supply of the control unit with pressed "Info/OK" key.
X Release the "Info/OK" key when "Load factory settings" appears on the display.
Z The control unit has been reset to factory settings.
9.4 Setting the language
07178E02
Fig. 9-3: Setting the language
X Select the "Language?" display by turning the selector switch by means of a
screwdriver.
X Press the "Info/OK" key to confirm the selection.
X Select the desired language by turning the selector switch.
X Press the "Info/OK" key to confirm the selection.
Z The display switches back to "Language?".
Z The desired parameter is set.
9.5 Adjusting the purge volume
07179E02
Fig. 9-4: Adjusting the purge volume
X Select the "Enter purge volume?" display by turning the selector switch by means of a
screwdriver.
X Press the "Info/OK" key to confirm the selection.
X Select the desired value by turning the selector switch.
X Press the "Info/OK" key to confirm the value.
Z A request for confirming the value again is prompted.
X Press the "Info/OK" key to confirm the value again.
Z The display switches back to "Enter purge volume?".
Z The desired parameter is set.
)
Factory settings: English
)
Possible adjustment range: 5 l - 50.000 l
Factory settings: 100 l
OK
Language
xxxxxxxxx
Language
?
OK
-English
-German
OK
Enter
purge volume
xxxxx ltr.
Enter
purge volume
?
confirm
purge volume
xxxxx ltr.
OK
+
50l/step
5l/step
OK OK