Stahl 8562 Series, Operating Instructions Manual

Page: 25 / 32

149909 / 8562604300
S-BA-8562-03-en-20/11/2008
Arrangement and Fitting
9
Miniature Circuit Breaker
8562/5
7 Arrangement and Fitting
7.1 Mounting position
7.2 Dimensional Drawings
8 Installation
8.1 Mains Connection
These circuit-breakers are explosion-protected devices to IEC/EN 60079-0. They must
be fitted into an enclosure with type of protection increased safety “e“, e.g. enclosure
type 8146/5 from R. STAHL Schaltgeräte GmbH.
04934T00
Vertical,
Terminals 1, 3, 5 at the
bottom
(all dimensions in mm) - subject to alterations
04733E00 04734E00
04735E00
04736E00
MCB 8562/51-... MCB 8562/52-... MCB 8562/53-... MCB 8562/54-...
Connect the cables with particular care.
Choose suitable cables and route them accordingly to ensure that the maximum permis-
sible conductor temperatures are not exceeded.
To ensure that creepage distances are maintained remove precisely 10, 17 or 21 mm of
insulation (see chapter “Mains Connection“).
The conductor must not be damaged (scored) when stripping the insulation!
Only heat-resistant cables must be used, if connected directly.