Stahl 8074/2 Series, Operating Instructions Manual

Page: 27 / 62

262224 / 807460300090
2017-07-31·BA00·III·en·00
Safety Notes
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Position Switches
Series 8074/2
2.3 Symbols on the Device
3 Safety Notes
3.1 Operating Instructions Storage
• Read the operating instructions carefully.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2 Personnel Qualification
Qualified specialist personnel are required to perform the tasks described in these
operating instructions. This primarily applies to work in the following areas
• Project engineering
• Mounting/dismounting the device
• (Electrical) Installation
• Commissioning
• Maintenance, repair, cleaning
Specialists who perform these tasks must have a level of knowledge that meets
applicable national standards and regulations.
Additional knowledge is required for tasks in hazardous areas! R. STAHL recommends
having a level of knowledge equal to that described in the following standards:
• IEC/EN 60079-14 (Electrical installations design, selection and construction)
• IEC/EN 60079-17 (Inspection and maintenance of electrical installations)
• IEC/EN 60079-19 (Equipment repair, overhaul and reclamation)
Symbol Significance
05594E00
CE marking according to the current applicable directive.
02198E00
According to its marking, the device is certified for hazardous areas.
15649E00
Input
15648E00
Output
11048E00
Safety instructions that must always be followed: The respective data must
be noted and/or the safety-related instructions contained in the operating
instructions must be followed for devices with this symbol!