background image

Mounting and installation

12

244627 / 652560300010

2017-07-13·BA00·III·en·03

Floodlight LED

Series 6525

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

7.2

Mounting / dismounting, operating position

• suitable for use indoors and outdoors

• designed for wall, ceiling, pole mounting with bracket

• max torque value between bracket and floodlight 10 Nm

• pendant mounting using ring eyes (M6).

7.3

Installation

7.3.1 Opening and Closing of the Enclosure

DANGER

Explosion hazard due to inadmissible heating!

Non-compliance results in severe or fatal injuries.

• Avoid external heat sources and/or direct sunlight (risk of change of 

temperature class or change of maximum permissible surface 

temperature).

• Do not exceed the maximum ambient temperature due to external heat 

sources (premature failure of equipment).

CAUTION

Risk of damage to the eyes caused by optical radiation!

Minor injuries are possible!

• The minimum distance for the narrow beam version between the 

luminaire and the viewer's eyes must be 8.23 m.

DANGER

Risk of electric shock due to improper opening!

Non-compliance results in severe or fatal injuries.

• Open luminaires without switch only in de-energized state 

(see information plate on the lock)!

NOTICE

Danger due to electrostatic discharge.

Electronic components can be destroyed if touched.

• Do not touch the LED-PCBs!

Summary of Contents for 6525 Series






















Reviews: