264820 / 6050628300
2018-07-24·BA00·III·en·01
Transport and storage
11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Universal spotlight LED
Series 6050/6
For further technical data, see www.r-stahl.com.
6
Transport and storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
7
Mounting and installation
Mounting
Wire guard and
external reflector
can easily be mounted later using an M6 mounting screw
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
Technical Data
Direct:
Using two integrated fastening clips on the housing for
screws with a max. diameter of 10 mm
Suspended:
Using two M8 ring bolts (accessories) mounted in integrated
threads in the housing
Pivoting:
Using the fastening bracket (accessory) installed on the
integrated holder on the housing
