Istruzioni , Instructions, Betriebsanleitung, , Instrucciones
14
Fixing the brackets to the post and gate
After having verified the optimum conditions for placing the plates and their alignment, fix them to the
post and gate permanently, either welding them or utilising expansion bolts (if the post is made of brick),
observing the value specified in Fig. 2.
28
Bottom edge of the
bracket fixed to the gate
Bottom edge of the
bracket fixed to the post
Fig.2
Fixing the gear motor
Lock the gear motor at the back with the M8 hex head screw with nut and washer (Fig.3).
Fig.3
Fit the nut screw on the front bracket pin and tighten the traverse screw to lock it in the working position
(Fig. 4).
Fig. 4
