Istruzioni , Instructions, Betriebsanleitung, , Instrucciones
13
Check the following points before commencing to install Ulixes:
Check that the gate structure is sufficiently robust and there are no points of friction.
Check the condition of the gate hinges; make sure they are adequately lubricated.
Check there is a mechanical stop in closing.
Check value
“C”
before installing, observing the specifications in the assembly table (tab.1).
By increasing value “
B
” the opening angle is reduced, peripheral speed and the thrust of the motor on
the gate is increased; to the contrary, by increasing “
A
” the opening angle is increased, peripheral speed
and the thrust of the motor on the gate is reduced.
D
A
B
Opening
A
B
C
OPENING
A
B
C
D
Travel 350
90
140 140
60
570
Travel 350
115
160 150
40
550
Travel 500
90
140 140
60
720
Travel 500
115
160 150
40
700
Tab.1
