Istruzioni, instructions Instrucciones
21
Calibrating the microswitches with the geared motor installed on the right
Closing:
With the geared motor released, close the gate to point wanted; turn the bottom cam clockwise
until the bottom microswitch trips and then lock it with the relative screw.
Lower
Microswitch
Lower Cam
Fixing screw
Lower
Cam
Opening:
With the geared motor released, open the gate to position wanted and turn the top cam
counter clockwise until the top microswitch trips and then lock it with the relative screw.
Upper
Microswitch
Upper Cam
Fixing Screw
Upper Screw
