OPERATING INSTRUCTIONS
Thank you for purchasing our Chorus Pedal.
Before operating this product, please
read the enclosed Operation Instructions
1
2
6
4
8
3
5
7
1. True BYPASS Footswitch
Push down on the footswitch to switch between effect
and bypass status.
2. LED Indicator
On: effect is active. Off: bypass mode is active.
3. RATE
Adjusts the speed of the chorus effect produced.
Turn clockwise to increase rate, and anti-clockwise
to reduce.
4. DEPTH
Adjusts the depth of the chorus effect waveform.
5. LEVEL
Adjusts the volume of the effect.
6. INPUT
Connect your guitar or other effect unit to the standard
Ø 6.3 mm INPUT jack of the pedal.
7. OUTPUT
Connect the output of your pedal to your amp
or other effect unit using the standard Ø 6.3 mm
OUTPUT jack.
8. 9V POWER ADAPTER INPUT
Connect your 9V DC regulated power supply adapter
plug here (negative polarity) (not included).
!
Use only the specified AC adaptor and connect
it to an AC outlet of the correct voltage.
Do not use any other AC adaptor, since this
may cause malfunction.