Pairing the power meter
The power meter must be connected or “paired” to the cycle computer or mobile device (collectively referred to as display
units) according to the display manufacturer’s instructions. Each power meter has a unique ANT+ device ID and a unique
Bluetooth ID. During the pairing process the applicable device ID is recorded by the display and will be used to communicate
with the corresponding power meter. The ANT+ ID number is printed on the back of the power meter and also supplied with
the documentation. The Bluetooth ID is recognized and displayed by the Bluetooth device during the pairing process. Both
the ANT+ and Bluetooth IDs are permanently assigned to the power meter and are not affected by changing the power
meter battery. Once paired to the power meter, ride data (Watts and RPM) will be transmitted from the power meter to the
display unit. Other important functions such as resetting the power meter’s zero offset will also be enabled through the
display unit.
ANT+:
Ensure the power meter has a fully charged CR2032 battery properly installed. Rotate the crank arm one time to
ensure the power meter is awake and ready to communicate. Follow the ANT+ device manufacturer’s instructions for pairing
a power meter to the display unit. The procedures may vary between manufacturers.
Bluetooth Smart:
Ensure the power meter has a fully charged CR2032 battery properly installed. Rotate the crank arm one
time to ensure the power meter is awake and ready to communicate. Follow the Bluetooth Smart Ready (4.0) device
manufacturer’s instructions for pairing a power meter to the display unit. The procedures may vary between manufacturers.
Summary of Contents for StagesPower
Page 1: ......
Page 4: ...Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6...
Page 5: ...fig 7 fig 8...
Page 15: ...W Et Y W KZ W d Z h Z h Z Z W d Z K d d W d d Z ds d...
