11
• Apply grease to the pedal threads before installing, and if required by the pedal manufacturer, use pedal
washers. Pedal extenders are not recommended.
• Follow installation instructions carefully, as the left pedal is reverse threaded. Do not force pedal
threads, as irreparable damage may occur to the crank arm.
• Check pedal manufacturer’s instructions for correct torque specification.
Configuring the bike
Before you can begin riding the StagesBike, you must first install the Stages Link app to connect to and
configure the bike.
Stages Link app
If you do not yet have the Stages Link app installed on your mobile device, please download and install it
now. The app is a crucial requirement for bike configuration, including firmware updates and necessary bike
settings. If you do not yet have a Stages Link account, create one now within the app.
Download Stages Link App:
Pre-configuration check list
Once you have the app installed, check these three things before moving on towards configuring your bike:
• Make sure the StagesBike has power and all wiring connections are plugged in. See step #11 of the
assembly instructions to confirm bike has power by testing the brake function.
• Make sure the battery tabs are removed from both power meters.
• Spin the cranks to wake up the power meters.
Once these things are ready, navigate to the Device Manager section of the Stages Link app and connect
your bike. Upon initial connection, the app will walk you through setting up the bike, including configuring
crank length and checking for any available firmware updates.
What’s next
Now that you’ve completed assembly and set up, your StagesBike is ready to set up bike fit, connect to
devices, and more. Our online quick start guide and video tutorials will walk you through the next steps.
Visit our online user manuals to continue:
manuals.stagescycling.com
The StagesBike and Stages Power meter devices may be protected by USA or foreign patents or patents pending.
This document may contain trademarks or registered trademarks of Stages Cycling LLC as represented by the use of ™
and ® respectively.
ANT+™ is a trademark of Dynastream Innovations Inc.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
En
gli
sh
