STAGEMOTION, S.L.
C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain)
C.I.F.: ES-B47584982
Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com -
P
a
g
e
9
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery
has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not
show success, disconnect the battery with a resistor lead.
Place of installation is behind the factory navigation monitor.
Interconnecting tuner-box, CAN-box and harnesses
1.
Connect harness CAB-AV-6P to 6pin Molex of tuner-box DT2C-M717.
2.
Connect harness DT2C-LR02 to 8pin Molex of CAN-box TV-500.
3.
Connect harness DT2C-LR02 to 14pin Molex of tuner-box DT2C-M717.
4.
Connect male MOST®-connector of harness DT2C-LR02 into female MOST®-socket of tuner-box
DT2C-M717.
Connections to the factory monitor
