STAGEMOTION, S.L.
C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain)
C.I.F.: ES-B47584982
Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com -
LAND ROVER DVBT TOUCH SCREEN > 2012
Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/
D4
P
a
g
e
6
Check compatibility of vehicle and accessories
Setting the dip switches of the CAN-box TV-500
Vehicle/ navigation
Dip 1
Dip 2
Dip 3
Dip 4
Dip 5
Dip 6
Land Rover
without
rear-view camera
ON
OFF
ON
OFF
ON
ON
Land Rover
with
rear-view camera
ON
ON
ON
OFF
ON
ON
Note
: Dip switch functions of the TV-500
Dip 1 – activation TV-free
Dip 2 – rear-view camera existing
Dip 3 – TV icon simulation
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown Fakra male
connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to
this input. On vehicles with factory rear-view camera set Dip 2 to ON, too.
Setting the dip switches of the tuner-box DT2C-M717
The 3 dip switches of the tuner-box DT2C-M717 are without function. The dip switch settings are:
Dip1 = OFF
Dip2 = OFF
Dip3 = OFF
LED‘s of the tuner-box DT2C-M717
Requirements
Vehicle Range Rover Evoque L538, Range Rover Sport L320 ab Modelljahr 2012, Discovery4 L319 ab Modelljahr
2012, Range Rover (Vogue) L322 ab Modelljahr 2013, Freelander 2 L359 ab Modelljahr 2013
Navigation
Touch-Screen Infotainment Version 3
Limitations
Factory-TV-tuner
Must NOT be installed. If uninstalled, optical ring must be closed.
After-market rear-view cam
Compatible with NTSC cameras only. Optionally available adapter is
necessary to connect.
2pcs. antenna ANT-12
