STACYC 18EDRIVE, Original Instructions Manual

Page: 16 / 27

P a g e | 16 P a g e |
Power Button”OFF”
Throttle
→ ”FULL” position
HOLD THROTTLE IN FULL
POSITION
Power Button”ON”
Throttle
→ ”FULL” position
LED → flashing YELLOW
5 yellow flashes
Selection MODE:
Throttle
→ ”LOW” position
LED → solid RED
(training mode)
Selection MODE:
Throttle
→ ”MID” position
LED → solid YELLOW
(standard mode)
Selection MODE:
Throttle
→ ”FULL” position
LED → solid GREEN
(advanced mode)
Select Program:
6. Turn throttle, and as the throttle moves through the range of power
modes, the Green LED light will illuminate.
7. Hold Throttle at the power mode (LED position) desired
approximately 5 seconds until “2 short beeps” are heard.
o Red→training mode (slow)
o Yellow→standard mode (medium)
o Green→advanced mode (fast)
Exit Program Selection:
8. Release throttle.
9. All LED lights flash together 1 time with “1 long beep”.
10. LED Light indicating selected power mode will now be illuminated.
o Operation of cycle will be with the illuminated power
mode. Cycle will stay in this power setting unless changed
as per steps above:
o Red→training mode (slow)
o Yellow→standard mode (medium)
o Green→advanced mode (fast)
Power Button”ON”
Throttle
→ ”FULL” position
LED → flashing GREEN
5 Green flashes with 5 beeps, all
LEDS stay lit, release throttle, all
LED lights off, ready to choose
power model
◀
◀
LED
LED