Page | 8
Step 5: Disable and enable EPO function
Keep pin 1 and pin 2 closed for UPS normal operation. To activate EPO function, cut the wire between pin
1 and pin 2.
Step 6: External battery connection
Connect one end of external battery cable to UPS unit and the other end to battery pack. See below chart
for detailed connection.
CAUTION:
Connection to External Battery shall be installed by SERVICE PERSONNEL only.
CAUTION
– Risk of fire hazard.
Step 7: Turn on the UPS
Press the ON/Mute button on the front panel for two seconds to power on the UPS.
Note: The battery charges fully during the first five hours of normal operation. Do not expect full
battery run capability during this initial charge period.
Step 8: Install software
Install UPS monitoring software to fully configure UPS shutdown. Follow the steps below to download and
install monitoring software:
1. Go to the website
http://www.power-software-download.com
2. Click ViewPower software icon and then choose your required OS to download the software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon located in the
system tray, near the clock.
External Battery Pack
External Battery Pack
UPS
Short terminals for UPS
normal operation.
