Chapter 6: Bundled Software Installation
Guide
6.1.
Hardware Installation
1. Connect the male connector of RUPS II cable to the UPS communication
port.
2. Connect the female connector of RUPS II cable to a dedicated RS232 port.
If there is only a DB25 connector of the RS232 port available, you may use
a DB9-DB25 adapter to convert it.
6.2.
Software Installation
6.2.1.
RUPS II Installation
A. RUPS II for MS-DOS
1. Insert the system diskette into your floppy disk driver and
execute
INSTALL.EXE
under MS-DOS.
A:\>CD\DOS<Enter>
A:\DOS>INSTALL<Enter>
2. Please select the MS-DOS menu from the installation menu box,
And give the path of RUPS II system diskette and the designated directory
of it. (You may use the default value of RUPS II)
3. The installation program will copy all required files of the RUPS II into
the designated path. It will also append a
Load
RUPS.EXE
C
ommand
in your
AUTOEXEC.BAT
file automatically. After a complete
installation is done, the installation program will execute the
CONFIG.EXE
automatically. You may modify the configurations of
RUPS II now.
B. RUPS II for Windows 3.1, Windows 95, 98, Windows NT
1. Execute "
A:\Windows\setup.exe
" under Windows system. (This
procedure can be achieved either by file manager or from the "RUN"
command of Windows.)
2. The RUPS II Setup group is labeled as RUPS2W, you may
Re-setup it to the desired group you wish.
