40531-1506
3
18
The safe must be mounted to a wall stud, and to a
permanent shelf or the floor. For optimal safety
and security, the safe should be installed in an
isolated, dry and secure area.
NOTE: Do not mix old and new batteries. Do not
mix alkaline, standard or rechargeable batteries.
This safe uses 4 - AA batteries. Under normal use,
batteries will last about 1 year.
NOTE: If the batteries are low, the yellow light will
flash when you start to enter your code.
To replace the batteries, open the battery
compartment on the back of the door by pushing the
tab in the direction of the arrow and install all new
batteries.
BATTERY REPLACEMENT
SECURING THE SAFE
SELECTING A LOCATION
TURNING THE KEYPAD SOUND
OFF/ON
Figure 1
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN.
NOTE ON LOCKING THE SAFE: The safe
needs to be in an upright position, as shown in
figure 1, for the locking mechanism to function
properly. Failure to mount the safe in the correct
upright position will compromise the safety and
security of the safe.
NOTE: This safe must be mounted to a wall
stud, and to a permanent shelf or the floor.
Failure to do so will compromise the safety and
security of the safe.
You can turn off the "Beep" sound of the keypad
by pressing the ... key.
To turn the "Beep" sound on, press the ....
key again.
PS-1520
PS-1508
PS-1514
PS-1515
PS-1415-RTX
Your safe comes with the "Beep" sound turned on.
