FLOOR LOCKING CABINET: ASSEMBLY INSTRUCTIONS
6
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
NOTE: This cabinet must be mounted and secured to wall studs
in the top pre-drilled holes in the back of the cabinet so that it is
anchored to the wall studs in two locations. The cabinet must
also be mounted to the floor. Failure to do so will compromise
the safety and security of the cabinet. Use the hardware
provided or consult your hardware retailer for fastening
hardware for your particular mounting surfaces.
Drill (2)
³⁄₁₆
" pilot holes into the wall studs lining up with the top (2)
mounting holes in the back of the cabinet. Secure the cabinet to the
wall using (2) lag bolts and washers.
Drill (2) pilot holes and secure the cabinet bottom to the floor with (2)
lag bolts and washers.
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
Parts Supplied:
⁷⁄₁₆
" Wrench
Key and backup key (2)
8-32 x
¹⁄₂
" screw (10)
8-32 x nut (10)
¹⁄₄
" x 1-
¹⁄₂
" lag screw (4)
Washers (4)
Unpack the Cabinet
NOTE: Keep the packing materials to cushion the cabinet during
assembly and then dispose of/recycle all packaging materials.
1. Verify contents. See “Parts Supplied.”
GCL-2SF-BB
GCL-2SF-BR
Models
