BATTERY INSTALLATION
TAB
You must first install the battery which is located in
the front protective styrofoam.
NOTE: When changing the battery, always hold
the battery connecting cap while disconnecting or
attaching the battery. Do not pull on the wires.
Doing this could cause the power supply to become
disconnected from the lock.
This safe uses one 9V alkaline battery. Under normal
use the battery will last about 1 year.
When the battery is low and you press a button on
the keypad, a red light will come on warning you
that the battery is low.
To replace the battery, remove the cover by pressing
the tab and turning the cover as shown in the
illustration below. Replace the old battery and screw
the cover back in place.
IMPORTANT:
Your safe is delivered with a Safety
Interlock Screw which must be removed
in order for you to lock your safe.
Failure to do so will compromise the
safety and security of your safe.
First open the safe by turning the handle clockwise
and pulling the door open.
Locate the Safety Interlock Screw on the side of the
door; unscrew with a Phillips screwdriver, remove
and discard the screw.
Your safe can now be closed and locked. Do not
lock your instruction manual and/or keys in the
safe. You will need this manual for the instructions
on locking and unlocking the safe.
Safety Interlock Screw
40670-1511
2 16