18
Viewing Mode
Signal Indicator
The signal indicator shows the strength of the signal being received from the camera. The number
of bars in the Signal Indicator shows the strength of the signal. One or No Bars indicates the
signal is poor, and 4 bars indicate a very strong signal.
Signalstrength
Indicator
Warning
Perfect
None
Good
None
Fair
Low Signal
Low
Low Signal
No Signal
No Signal
Low Signal / No Signal Warnings
When the Camera is positioned too far from the Receiver, warning messages will be displayed:
LOW SIGNAL:
The Low Signal signal appears when the receiver has One or Two bars. You will
still get an image, however updating may be less frequent.
NO SIGNAL:
The No Signal message means the receiver cannot access the camera. Please
reposition the camera, or check the Camera power.
Channel Indicator
Displays the current channel number. Press the Right Button on the Receiver to switch between
available cameras.
NOTE
: To automatically switch between channels, press the Left Button (AUTO).
Adjusting the Receiver Volume
The Receiver Volume can be adjusted using the UP
V+
and DOWN
V-
arrow buttons when viewing
a camera.
Press the DOWN
V+
button to decrease the Volume, and press the UP
V-
button to increase the
volume. When the volume is set to one bar (lowest setting), the volume is muted.
The Volume Adjustment icon will be displayed during Volume changes, and will disappear after
10 seconds of inactivity.
