14
2. While the channel number is flashing:
Press the Up button to move to a higher channel.
Press the Down button to move to a lower channel.
The channel changes from 1 to 8, or from 8 to 1.
3. Press the
PTT
button to confirm the selected channel and return to
the NORMAL mode.
NOTE:
Refer to the "Channel Table" section of this Owner's Manual
for detailed frequency listings.
High/Low power selection:
1. Press
twice to enter to High/Low power page.
2. Press / button to select the power level. The LCD panel indicates
"L"
when low power is selected. Low power can extend the life of
battery life but would reduce the talking range.
Monitor:
You can use the MONITOR feature to check for weak signals in the
current channel.
1. Press the
button 3 times to activate this function.
2. Press again the
button to deactivate the function.
Using the Torch:
Press and hold the Torch button to shine the torch. The torch works
even when the unit is switched off.
Automatic Power Save Feature:
After 6 seconds for the last operation, the PMR enters to the power
saving mode automatically. The life of the batteries would be extended.
The PMR is still able to receive transmission in this mode.
Low Battery Alert:
When the batteries in the unit are low, an alert tone will be heard and
red LED will light up once every 15 seconds. Replace new batteries
immediately.
Channel Scan:
CHANNEL SCAN performs searches for active signals in an endless
loop from 1 to 8.
1. Press and hold SCAN
S
button for 1 second to turn on scan function.
Summary of Contents for freecomm 150 PMR 446
Page 19: ...19 ...
