Stabilezelte 3x3 Romance, Assembly Instruction Manual

Page: 17 / 31

Assembly instructions and warnings
!!! Please read this leaflet carefully !!!
Important to keep for future reference
Dear Customer,
Thank you for choosing our product, as well as for the confidence you have placed in us.
We recommend observing these instructions carefully so that you may enjoy your pavilion for a long time.
-
Please ensure that you find all parts in the carton box in the correct type and quantity as mentioned in the
list illustrated in every page accordingly.
-
Please carry out the steps in the order set out in these instructions.
-
Do not tighten the steps in the Aluminum Pavilion until completing on the assembly of the poly carbon ate
panels.
- Keep these instructions in a safe place for future reference. If the pavilion is passed on to third parties, the
instructions for use must also be passed on.
Safety advice
-
We strongly recommend the use of work gloves during assembly.
-
Do not attempt to assemble the Aluminum Pavilion in windy or wet conditions.
-
Do not touch overhead power cables with the aluminum profiles.
-
Always wear shoes and safety goggles when working with extruded aluminum.
- Dispose of all plastic bags safety-keep them out of reach of small children.
- The Aluminum Pavilion must be positioned and fixed on a flat level surface.
-
Do not lean against or push the Aluminum Pavilion during construction.
- Keep children away from the assemble area.
- Do not position your Aluminum Pavilion in an area exposed to excessive wind.
-
Do not attempt to assemble this Aluminum Pavilion if you are tired ,have taken drugs or alcohol or if you are
prone to dizzy spells.
- If using a step ladder or power tools ensure that you follow the manufactures safety advice.
-
Do not tighten bolts or nuts! Care must be taken when tightening to avoid "overtightening".
- Hot items such as recently used grills, blowtorches etc. must not be stores in the Wall shed.
- Ensure there are no hidden pipes or cables in the ground before inserting the pegs.
-
Beware of thunderstorms! During storms and/or thunderstorms the pavilion must be left.
- Intended use. The pavilion is designed as sun protection and can be used as such. It can only be used to a
limited extent as protection against further weather phenomena.
-
Make sure that the roof panels are mounted so that the side facing the sun is designed for it. This is marked
with an appropriate note. Incorrect installation may result in damage to the plates which is excluded from
the warranty!
-
We are not liable for damage to the product caused by force majeure or environmental influences such as
wind, hail, snow, frost, etc. Have arisen. The same applies if the product has been stored or used under
conditions that are outside the technical specification or as damage due to improper handling, in particular
due to non-observance of the operating instructions or technical modifications. Normal wear and tear, which
does not impair the function of the product, does not constitute a warranty case.
- The pavilion should be cleared of snow loads immediately. The guarantee for snow loads is max. 100 kg/m ² .
17