en
Registering the receiver with the laser transmitter
Registering the REC 410 Line RF receiver with the laser transmitter
1. Switch off the laser transmitter (button 1a)
2. Press and hold down buttons (1c) and (1d).
3. Switch on the laser transmitter - (button 1a)
4. The laser transmitter is in registration mode
The LEDs (red and green) flash alternately.
5. Press the button “automatic precision alignment“ (d)
on the REC 410 Line RF receiver.
6. The red and green LEDs on the laser transmitter will flash
3 times for 3 seconds: » Registration was successfully completed!
Replacing the batteries
Battery display
Open the battery compartment cover (m) in the
direction of the arrow. Insert new batteries as
indicated by the symbols in the battery compartment.
3 x 1.5V miniature alkaline batteries, size AA, LR6.
Remove the batteries if the receiver will not be used
for a long period.
Protective casing
Do not unscrew receiver! Do not submerge into water! Protection IP 54
Bracket
(a) Magnet: For securing the receiver.
(b) Reading reference: The edge is “in line“ and can therefore be used
for taking accurate readings on levelling staffs.
(c) Securing knob. Turning the securing knob fixes/releases the clamp
with the receiver to/from the levelling staff.
(d) Moveable clamping jaw – for fixing to the levelling staff.
RE
C 410
Line R
F
IP 54
IP 54
RE
C 410
Line R
F
RE
C 410
Line R
F
