1.2
Hardware and software requirements
The
development board through the Arduino
UNO R3 connectors, as shown in the figure below.
Figure 2.
X-NUCLEO-GNSS2A1 expansion board connected to an STM32 Nucleo development board
The
can be connected to any
development board, even though complete
testing has been performed on the
board.
To use the
expansion board, the following
software and hardware specifications are required:
•
a PC with Microsoft Windows
®
10 to install the software package (
);
•
or
);
•
a type A to mini-B USB cable to connect the
to the PC;
•
software package;
•
The installation of the
and the
graphical user interface utility on the user PC
requires:
•
128 MB of RAM;
•
40 MB of hard disk space.
UM3020
Hardware and software requirements
UM3020
-
Rev 1
page 3/21
