UM2205
Getting started
DocID030539 Rev 1
9/21
Reference
Description
D106 (Blue LED)
3.3V power
D107 (Blue LED)
User LED
Notes:
(1)
allows using the 5V from the NUCLEO-F072RB as VBUS when no external power supply is available and only
in the provider role
– mainly used for demo purposes. If an external power supply is connected, the jumper must
be left open
Refer to UM2191 on www.st.com for further details.
1.4
Basic configuration setup
To run the embedded demonstration example, the hardware must be configured.
1
Plug the P-NUCLEO-USB002 expansion board onto the NUCLEO-F072RB board ST
morpho connectors.
The correct orientation is pictured below.
Figure 5: P-NUCLEO-USB002 mounting orientation
2
Apply the correct NUCLEO-F072RB jumper settings
JP1 open
JP5 (PWR) closed on U5V
JP6 closed (IDD).
