UM1065
Overview
Doc ID 018640 Rev 4
5/65
1.4 Delivery
recommendations
Several verifications are needed before using the board for the first time to make sure that
nothing has been damaged during shipment and no components are unplugged and lost.
When the board is extracted from its plastic bag, please check that no component remains
in the bag. Main components to verify are:
1.
The 25 MHz crytals (X1 and X4) may have been removed by a shock.
2.
The camera connected on socket CN15 located on the right side of the board under the
JTAG connector may be unplugged. If this is the case, please refer to the note in
to make sure to replug it in the correct position.
3.
The MicroSDCard may have been ejected from its connector CN6 (top left corner of the
board).
The plastic protection on the camera should be removed carefully as the connection is very
fragile.
