UM1065
Hardware layout and configuration
Doc ID 018640 Rev 4
Figure 4.
Pin 1 camera plug
The camera extension connector CN23 is available on the boards to connect the ST camera
plug-in board.
2.19 SRAM
The 16 Mbit SRAM is connected to FSMC bus of the STM32F217IGH6 which shares the
same I/Os with CAN1 bus. JP3 and JP10 must not be fitted for SRAM and LCD application.
Table 14.
SRAM related jumpers
Jumper
Description
JP1
Connect PE4 to SRAM as A20 by setting JP1 as shown (Default setting):
Connect PE4 to trace connector CN13 as TRACE_D1 by setting JP1 as shown:
JP2
Connect PE3 to SRAM as A19 by settiing JP2 as shown (Default setting):
Connect PE3 to trace connector CN13 as TRACE_D0 by setting JP2 as shown:
3
2
1
3
2
1
3
2
1
3
2
1
