May 2010
Doc ID 16379 Rev 2
1/37
UM0819
User manual
Getting started with STEVAL-PCC010V1,
ST802RT1 TX mode Ethernet PHY demonstration kit
1 Introduction
The STEVAL-PCC010V1 demonstration kit was designed to evaluate the ST802RT1 TX
mode. This device is a Fast Ethernet physical layer (PHY) interface which supports 100
Base-TX and 10 Base-T applications. The PHY provides a Media Independent Interface
(MII) and Reduced Media Independent Interface (RMII) for easy attachment to a 10/100
Media Access Controllers (MAC). The demonstration board features jumpers, test points
and connectors to test the ST802RT1 TX mode Ethernet PHY.
To quickly evaluate the microcontroller and physical layer, the device can be connected to
the STM32F107 controller demonstration board through an additional header connector.
The controller board is preprogrammed with a web server demonstration application. The
STM32F107 controller demonstration board is part of the STEVAL-PCC010V1 package
delivery.
The board can be equipped with a dedicated digital connector compatible to the Spirent
®
Communications SmartBits 200/2000 (SMB-200/ SMB-2000) analysis system.
Figure 1.
ST802RT1 TX mode Ethernet PHY demonstration board - top view
Figure 2.
STM32F107 controller demonstration board - top view
www.st.com
electronic components distributor