January 2013
Doc ID 023744 Rev 1
1/26
UM1579
User manual
STEVAL-MKI132V1- BlueMotion motherboard for MEMS
adapter boards
Introduction
The STEVAL-MKI132V1 (BlueMotion) motherboard is designed to provide the user with a
complete ready-to-use platform for the demonstration of MEMS devices mounted on
adapter boards.
This STEVAL-MKI132V1 demonstration board uses an STM32F103TB microcontroller and
an SPBT2532C2.AT Bluetooth
®
module; it functions as a bridge between the sensor on the
adapter board and the PC. It is possible to connect the BlueMotion to the PC using the
Bluetooth module and using the Unico graphical user interface (GUI), downloadable from
the ST website, or dedicated software routines for customized applications.
This user manual describes the hardware included with the demonstration board and
provides the information required to install and run the demonstration board user interface.
For details regarding the features of each sensor, please refer to the datasheets available for
each individual device.
