ST STEVAL-ISB044V1, User Manual

Page: 35 / 57

UM2301 GUI
and evaluation procedure
DocID031141 Rev 1 35/57
At the end of the test, in the protocol window, the AUTOCAL_TEST_DONE is set and in
the test window the status is
Test Done
.
Figure 43: STSW-STWBCGUI: test result
3
Start the test again if the returned status is different.
5.2.2 QFOD calibration procedure
1
2
Set the test number to 2
Click the
Start
button
Figure 44: STSW-STWBCGUI: QFOD test
At the end of the test, in the protocol window, the AUTOCAL_TEST_DONE is set
and in the test window the status is
Test Done
.