UM0857
Additional setup information
Doc ID 16752 Rev 1
43/66
8.
Place the battery on the space provided.
Figure 52.
Battery correctly placed
9.
Solder the positive terminal of the battery to the first pin (square) of the jumper
designated as BT1. Connect the negative terminal of the battery to the third pin of the
jumper designated as BT1.
Figure 53.
Soldering the battery
During soldering, care should be taken to avoid damage to the case and the nearby LEDs.
10. Switch on the power switch and the PW LED glows green which confirms that the
battery is connected in the proper manner.
Figure 54.
Checking that the battery connections are correct
!-V
*UMPERDETAILS
3OLDERINGTHEBATTERYTERMINALS
!-V
3WITCHINGONTHEPOWERSWITCH
07,%$OFTHEBOARDGLOWINGASGREEN
www.BDTIC.com/ST
