ST STEVAL-IFS014V1, User Manual

Page: 17 / 66

UM0857 System operation
Doc ID 16752 Rev 1 17/66
3.2 Establishing the network
Completion of the steps in Section 3.1 creates the network for the smart monitoring station
(STEVAL-IFS014V1). In order to join the different smart monitoring nodes (STEVAL-
IFS015V1) to the network, the user should perform the following steps:
1. After the data screen is displayed on STEVAL-IFS014V1, the user should power on one
of the smart nodes (STEVAL-IFS015V1) (for details see
Section 5 ).
2. A screen on the display of STEVAl-IFS014V1 appears indicating that a new node has
joined the system as shown in
Figure 9 .
Figure 9. Newly joined node
3. After a while, the user is asked to assign the node number to the newly joined node, as
shown in
Figure 10 .
Figure 10. Assign node number
4. The user can assign the node number using the touchscreen by pressing the icons
displayed on the screen (to see the meaning of the various icons, see
Section 4.4 ).
5. As the node number is assigned to the joined node, the display returns to the default
data screen, but with the displayed node number which has joined the system. The
parameters of the node are displayed on the screen as shown in
Figure 11 .
www.BDTIC.com/ST