4
Hardware description
4.1
Hardware features
The SPC572LADPT100S mini module board has the following features:
•
Can be used as a stand-alone board by providing external power supplies input (5 V, 3.3 V, 1.25 V)
•
Reset button with driver and led indicator
•
SPC572LADPT100S has socket for device in LQFP100-EP package
•
Debug ports:
–
34-pin SAMTEC connector for Nexus 2
–
14-pin header connector for JTAG port
–
12-pin header connector for SIPI interface
•
40 MHz crystal main oscillator with jumpers to optionally disconnect it
•
8 MHz oscillator with jumpers to optionally disconnect it
•
Clock input through SMA connector to optionally disconnection
•
2 X SAMTEC QSH series, 240 way connector to connect mini module to motherboard
4.2
Hardware dimensions
The evaluation board has the following dimensions:
•
PCB area: 127 mm x 114.3 mm
•
Top components height: 18.8 mm
•
Bottom components height: 3.5 mm
•
PCB thickness 1.6 mm
4.3
Pin numbering for jumpers
3-pin jumpers for the mini module have rectangular pad to indicate the position of pin 1 and there is the PCB
silk-screen with the numbers of all the pins. See the example below for the numbering convention used in this
manual for jumpers settings:
Figure 4.
Overview of 3-pin jumpers numbering convention
6-pin jumpers for the mini module have the PCB serigraphy with the numbers of all pins. See the example below
for the numbering convention used in this manual for jumpers settings:
Figure 5.
Overview of 6-pin jumpers numbering convention
UM3063
Hardware description
UM3063
-
Rev 1
page 6/29
